v2.0.0-rc.5September 17, 2026
+New Features
- You can now compare Vibe Match Reports. Tick two to ten reports measured against the same Vibe Profile, and the comparison shows who is ahead and by how much, what decides it, and whether the answer holds under other priorities. When the evidence cannot separate them, it says there is no clear leader instead of picking one. Comparing is free.
- Every row of a comparison opens to show what its score was made of: the analysis's own explanation, the photos grouped by what was seen in them, each priced step of the adaptation plan, and which main rooms were never photographed. Any photo opens large, and "Rooms side by side" shows the same room across every report.
- A comparison can be saved and shared by link. A saved comparison stays exactly as it read on the day it was saved, even if the reports change later, and the link can be revoked at any time.
- Tools for a shortlist: must-haves that rule out any report failing them (for example, a place to work, every main room photographed, no irreversible changes, or a plan within budget), a status for each report, private notes, a baseline report the others are measured against, and column ordering by any row.
- Add what photos cannot show. Your own rows — rent, commute, floor area — count toward the answer with the importance you choose, and a real price for the adaptation work replaces the estimate.
- Each report in a comparison gets a viewing checklist built from what is still unknown: rooms nobody photographed, things the analysis could not establish, prices to confirm, and changes the landlord would have to allow. Ticks are kept, and the checklist prints with the comparison.
- Expert Vibe Match Reports now include an adaptation plan: concrete steps with the effort each takes, how reversible it is, whether it leaves with you when you move, and an estimated cost. Where a change may need permission, the report reminds you to check your agreement rather than assuming.
✦Improvements
- "Explain in words" now writes a short brief grounded in what the reports show, with a "Before deciding" list of what to find out. It answers in the language of your interface, and every figure it quotes is checked against the comparison.
- A comparison can be exported as a spreadsheet or printed and saved as PDF, including the details of every row, whether or not it was opened on screen.
- Studio now opens onto its sections — Vibe Profiles, Vibe Match Reports, Comparisons and Favourites — and saved comparisons appear in Recent work with their own filter.
- Actions on a comparison — back, share, export, save and the Vibe Profile it was measured against — now sit in a floating panel at the bottom of the screen.
- A Vibe Match run now takes up to twelve photos and examines every one of them. Before, more could be uploaded, but only six were examined.
- Expert runs are given the time the work actually takes, and the progress screen says how long to expect and that the tab can be closed. Expert explanations are also more detailed.
- When the evidence for a single zone is incomplete, the report now marks that zone as not established instead of discarding the whole analysis.
×Bug Fixes
- Fixed report selection being hidden on the Basic plan, which made comparing look like a paid feature.
- Fixed comparisons naming a leader on differences smaller than a single observation, and calling a plan the cheapest when the cost estimates overlapped.
- Fixed zones nobody photographed being counted as a score of zero.
- Fixed a comparison printed from the dark theme coming out as pale, hard-to-read text.
v2.0.0-rc.4August 1, 2026
+New Features
- Vibe Match now examines each room photo separately and then writes the comparison, instead of doing everything in one pass. Analysis is noticeably quicker, and repeating a run on photos already seen returns almost immediately.
- A Vibe Match run no longer holds the page while it works. You can follow real progress, see how many photos have been examined, and leave the tab without losing the run.
- Account recovery is now available: if you can no longer sign in, support can issue a single-use recovery link that lets you set a new password. Two-factor verification is still required, so the link alone never opens an account.
✦Improvements
- Vibe Match now tells you exactly how much of your gallery it examined: which photos were analysed, which were set aside as unusable, and which it could not read at all. A photo it could not read is never treated as evidence that something is missing.
- When analysis is temporarily unavailable, the message now says plainly that the problem is on our side and being worked on, instead of showing a generic failure. Your uploads and settings are kept so you can retry later.
- Messages about a temporary problem now appear as a notification and clear themselves, rather than staying on the page after they stop being relevant.
- Vibe Memory is no longer built or stored while the Vibe Memory setting is turned off. Previously it kept updating in the background after a favorite changed.
- Turning Vibe Memory off and then asking to refresh it now tells you the setting is off, instead of reporting a generic failure.
×Bug Fixes
- Fixed a completed Vibe Match report failing to open from the summary view. The finished result could not be retrieved, and the report appeared to be lost.
- Fixed reports of unusable images being replaced by an unrelated error message, so it is clear again which photos need to be changed.
v2.0.0-rc.3July 26, 2026
+New Features
- Studio now brings active work, recent Vibe Profiles and reports, drafts, Vibe Memory, and next actions into one workspace.
- Workspace Focus now includes saved Create Vibe and Vibe Match defaults that you can review and apply to each run.
- Taste Evolution now shows how favorite Vibe Profiles contribute to Vibe Memory over time.
- Completed Create Vibe results now offer a direct Continue to Vibe Match action, including a guided guest-to-account handoff.
- Supported workspaces can now import listing photos for Create Vibe and Vibe Match.
- Vibe Match now explains which visible signals raised or lowered alignment and where evidence is incomplete.
✦Improvements
- The landing page, shared header, Studio, Create Vibe, Vibe Match, Profiles, and settings now use a more consistent visual and navigation system.
- Create Vibe has a clearer Basic and Expert setup while keeping uploads, Pinterest, listing imports, text, property context, Source Mix, analysis depth, and required zones available where supported.
- Saved Profiles and reports are easier to reopen and continue through Profiles and Studio, with clearer Profile favorite controls.
- Vibe Match can continue with usable interior photos when an imported listing also contains unrelated media.
- Create Vibe checks the complete submitted image set before preference analysis, while Vibe Match reports use only images accepted for analysis.
- Analysis responses are checked for structural and decision consistency before a result can be shown or saved.
- Plan usage, Expert access, and remaining demo availability are shown more clearly without silently changing modes.
- Sign-in and protected return navigation are more dependable, with clearer recovery when a saved guest result can no longer be continued.
- Privacy and Terms pages now explain image processing, automated outputs, listing imports, data rights, and deletion timing more clearly.
- Russian labels, guidance, dates, and error messages are clearer across the main product flows.
×Bug Fixes
- Fixed Basic Create Vibe opening with an Expert-style Source Mix.
- Fixed Source Mix weights changing unexpectedly as additional input types were added.
- Fixed valid zero Vibe Match scores being replaced by a midpoint value.
- Fixed a completed Expert result disappearing when the run used the last available allowance.
- Fixed Profile and report save retries that could lose continuity or create duplicate saved artifacts.
- Fixed localized step labels overlapping or leaving the viewport on smaller screens.
- Fixed Vibe Match guest animation continuing when reduced motion is preferred.
- Fixed cases where the home route could show stale Studio content instead of the landing page.
v2.0.0-rc.2March 5, 2026
+New Features
- Guided onboarding now supports step-level enter actions and resilient target discovery across Create Vibe, Vibe Match, and Studio.
- Vibe Match tour now includes a dedicated Guidance step so users can tune recommendation scope before running analysis.
- Profiles cards now expose a clearer selected state (badge + focus ring) to reduce accidental actions.
✦Improvements
- Studio tour anchors were remapped to real section cards (Resume work, Recent outputs, Connectors, Activity) for consistent onboarding flow.
- Tooltips now render through a portal with collision padding, so hints stay near the question mark on desktop and mobile.
- Profiles now opens on Vibe Profiles by default and does not auto-select a card on entry.
- Profiles action hub was simplified by removing duplicated object titles/status text.
- General modals and confirmation dialogs were tuned for better readability with balanced glass opacity.
×Bug Fixes
- Fixed Create Vibe onboarding loop where step 2 could repeat and block progression to later steps.
- Fixed Vibe Match onboarding flow where step transitions could stay pinned to the previous target.
- Fixed cases where onboarding targets mounted late and were skipped too early; retry logic now stabilizes step binding.
- Fixed Profiles context fallback that could silently bind actions to the first card instead of an explicit user selection.
v2.0.0-rc.1February 26, 2026
+New Features
- Create Vibe (Expert) now supports multi-source analysis from uploads, Pinterest, text prompt, and property context with Source Mix balancing.
- Added draft workflow for Create Vibe: save draft, continue later, and restore source inputs with analysis settings.
- Vibe Match now includes zone-level scoring, what-if simulation, and side-by-side report compare with delta view.
- Profiles workspace now supports Favorites with dedicated filter and unified action hub for profile cards.
- Added Workspace Package selection (8 role contexts) and package-aware presets in user settings.
✦Improvements
- Canonical routes are now Create Vibe (/create-vibe) and Vibe Match (/vibe-match), with redirects from legacy paths.
- Profiles and compatibility flows now use lighter list payloads with detail loading and improved pagination behavior.
- Home and key product surfaces were updated for clearer value communication and stronger visual consistency.
- Export output for Vibe Profile and Vibe Match Report was redesigned to align more closely with in-app modal presentation.
×Bug Fixes
- Fixed multiple modal and dropdown layout-shift cases caused by scroll lock side effects.
- Fixed dark-theme rendering inconsistencies in profile and compatibility result modals.
- Fixed skeleton loading counts so placeholders better match expected card counts in key flows.
- Fixed draft resume edge cases where description and source signals could restore incorrectly.
v1.5.0November 18, 2025
+New Features
- Vibe Match now starts with a short summary while detailed advice keeps loading in the background, so you can decide faster.
- You can try Create Vibe without an account: we keep your results and automatically add them to your Aera profile once you sign in.
- The Vibe Profiles page now streams saved Vibe Match Reports one by one, letting you review other vibes while fresh results finish loading.
✦Improvements
- Create Vibe and Vibe Match prepare photos ahead of time, show clear progress, and feel much smoother on slower connections.
- Vibe Match Reports highlight the exact vibe you compared with and offer a quick jump back to that Vibe Profile.
- The mobile menu, notifications, and cached images were refreshed to make Aera Vibe feel lighter and more responsive.
v1.4.0July 25, 2025
+New Features
- Introduced a settings section, divided into tabs: Profile, Security, Billing, Privacy, Support.
- Added the ability to edit email, phone number, residential address, and mailing address via modal windows.
- Added support for two types of user addresses: Residential and Mailing. Only one address is possible for each type.
✦Improvements
- The profile page has been redesigned: personal data and activity statistics are now displayed.
- Direct links to settings tabs have been added to the profile menu.
- Modal window behavior has been corrected: closing glitches have been eliminated.
v1.3.0July 20, 2025
+New Features
- Added a text description in Expert mode so Vibe Match can use more context.
- Added an informational message on the results page to show what data was used for the analysis.
✦Improvements
- Unified the design of the analysis and comparison pages, removing extra borders and backgrounds for a cleaner look.
- The property type selector is now fully styled to match the rest of the interface controls, including the dropdown list.
- Fixed color schemes in dark mode for modal windows, replacing blueish tints with neutral grays for better consistency.
v1.2.0July 19, 2025
+New Features
- Added a changelog to keep you updated on new features.
✦Improvements
- Redesigned the footer for a more professional look and better navigation.
- Updated the color palette to a fully monochrome scheme for a cleaner aesthetic.
- Improved the mobile menu with a semi-transparent, blurred background.
v1.1.0July 10, 2025
+New Features
- Introduced Vibe Match to compare your style with properties.
- Added Vibe Profile saving for registered users.
- Implemented dark and light themes.